Hyper-V: How to Run Hyper-V on a Laptop

Hyper-V: How to Run Hyper-V on a Laptop

This article is a work-in-progress. Please help correct and extend it. It is the Wiki way!

NOTE: The ability to run Hyper-V on a laptop is provided in the Windows "8" Consumer Preview as "Client Hyper-V" Read about it in the Client Hyper-V Survival Guide.
If you are not running Windows 8 CP, read on.

Hyper-V is an enterprise IT technology included in Windows Server 2008 and 2008 R2. As such the documentation on TechNet and MSDN is on enterprise IT use, on a server.  However, some may wish to use Hyper-V on a laptop or a desktop computer. Perhaps to learn about Hyper-V, or create training material such as demos, for development purposes, or just for fun. Sometimes, because of company IT policy and management practice for servers, running Hyper-V on a laptop is the only way you can develop or document something.

This article is meant to assist those who are using Hyper-V in this "non-standard way". For example, a frequently occurring issue in this scenario is documented here: After you deploy a Sysprep prepared image, the Hypervisor layer service does not start automatically in Windows Server 2008

Ensure that your laptop will run Windows Server 2008 R2 with the Hyper-V role enabled. Hyper-V requires processor virtualization extensions (Intel-VT and AMD-V) and requires those features to be enabled along with the No-Execute (NX) feature. If your laptop CPU is from AMD download and run the AMD Virtualization Technology and Microsoft Hyper-V System Compatibility Check Utility. If your laptop CPU is from Intel download and run the Intel Processor Identification Utility. For more CPU and other Hyper-V tools see http://social.technet.microsoft.com/wiki/contents/articles/hyper-v-tools.aspx. See also http://www.microsoft.com/windows/virtual-pc/support/configure-bios.aspx

If your constraint is organizational IT or licensing restrictions you can run the free Microsoft Hyper-V Server 2008 R2 on your laptop.

Hyper-V does not support wireless NICs, because Data Center servers typically do not use them. Likewise, Hyper-V does not treat power-saving features the same way was as laptops do.  Running Hyper-V on your laptop with a wireless NIC is not supported by Microsoft, but you can do it following the instructions in this article.

Alternatively, you can dual boot using boot to VHD. See great instructions here: http://www.hanselman.com/blog/LessVirtualMoreMachineWindows7AndTheMagicOfBootToVHD.aspx

To run Hyper-V on laptops, you must address several issues, including:

  • Hyper-V does not allow you to bind a wireless network adapter to a virtual machine, although an unsupported workaround was posted in http://blogs.technet.com/b/doxley/archive/2008/07/07/disconnecting-hyper-v.aspx
    • NOTE that if your laptop is domain-joined, you may have group policy that prevents this bridging for security reasons. To work around this, dis-join that laptop from the domain.
  • Power-saving features such as standby and hibernate are disabled when the Hyper-V role is enabled on the system. Other power management features, like changing the minimum and maximum processor speed while running on battery or plugged in, are still available. Since standby and hibernate features are not available, you cannot configure your laptop to go into a sleep state when you close the lid, nor to hibernate when the battery reaches a critical state.
  • The "user experience" for Windows Server 2008 is not the same as the "desktop experience" user's expect on a Windows Vista or 7 laptop. If you wish to change this see Using Windows Server 2008 as a SUPER workstation OS.
  • Virtual PC and Windows Virtual PC do not support 64-bit virtual machines. Therefore, Hyper-V is the only Microsoft solution for running 64-bit virtual machines on your laptop.
  • Some laptop display drivers, particularly those with3-D acceleration, are not supported in Hyper-V. Check your manufacturer information, or use the VGA.sys driver.

To bridge the Wireless Network Connection with the Virtual External Wireless Network

  1.  Log on to the system using an account with administrative privileges.
  2.  From the Control Panel, open the Network and Sharing Center applet.
  3.  Click on Manage network connections.
  4.  Select both Wireless Network Connection and Virtual External Wireless Network ( you need to select both at the same time so hold down the CTRL key while doing this)
    1. On the menu Advanced, select Bridge Connections. Note: If the Bridge Connections option is grayed out, it is possible that it has been disabled by a group policy. If this is the case, you can temporarily re-enable it by configuring the following registry value
    2. On the User Account Control dialog click Continue.
    3.  A new Network Bridge network connection will be created. Each time you create a virtual machine that needs to access the external network using your laptop’s wireless network adapter, ensure you configure the virtual machine’s network adapter to use the Virtual External Wireless Network. 

If this is not allowed because of your IT organization's policy, you can set up RRAS to use your wireless connection, using these instructions http://sqlblog.com/blogs/john_paul_cook/archive/2008/03/23/using-wireless-with-hyper-v.aspx

Hyper-V or Windows 7?

If you choose your laptop carefully, you do not have to choose between Windows 7 and Hyper-V.  It is possible to have both, though not at the same time as physical machines.  Using a laptop with an eSATA port or USB, you can boot from external disk.  For example, the laptop's internal disk will boot with Windows 7.  For demonstrations and labs, you can attach an external disk and install Windows Server 2008 R2 with Hyper-V or Hyper-V Server 2008 R2 on that.  Your laptop's POST boot menu will allow you to choose which disk to boot from. You can also boot from a VHD file stored on a USB flash key.

To install Hyper-V on your laptop, choose between:

  • As a role of the Microsoft Windows Server 2008 R2 x64: Server virtualization can be enabled by the installation of the Hyper-V role on the Windows Server 2008 x64 Standard, Enterprise and Datacenter Editions. It can be enabled on a Full or on a Server Core installation of the Windows Server 2008 x64.
  • As the free standalone Microsoft Hyper-V Server 2008 R2: Hyper-V Server is a dedicated stand-alone product. It is based on the Server Core installation of the Windows Server 2008, and contains only the Windows Hypervisor, Windows Server driver model and virtualization components, providing a small footprint and a minimal overhead for server virtualization solutions.

This example will use enabling Hyper-V as a role on a Windows Server 2008 R2 x64 full installation. Before installation, ensure your laptop satisfies the minimum/recommended requirements

  1. Log on to the system using an account with administrative privileges.
  2. From the Start / Administrative Tools, run the Server Manager snap-in.
  3. On the User Account Control dialog click Continue.
  4. Navigate to the Roles node and click Add Roles.
  5. On the Before You Begin page, click Next.
  6. On the Select Server Roles page, select Hyper-V and click Next.
  7. On the Create Virtual Networks page, click on the wired network adapters you want to make available to virtual machines and click Next.
  8. On the Confirm Installation Selections page, click Install.
  9. Click Close to finish the wizard, and then click Yes to restart the computer.
  10. After you restart the system and log on with the same account you used to install the role.
  11. After the Resume Configuration Wizard completes the installation, click Close to finish the wizard.
  12. Install required updates listed at http://technet.microsoft.com/en-us/library/dd430893(WS.10).aspx
  13. Restart the system.

To enable a virtual machine to be linked to a wireless adapter, create a bridge between a virtual “internal only” network and the actual physical wireless adapter, if your IT environment allows this (often if you are not joined to the domain).

For example, the physical wireless adapter installed on the system is named Wireless Network Connection:

  1. On the Hyper-V Virtual Network manager, create a virtual network adapter named Virtual External Wireless Network and configure it as an Internal only network. 
  2. On the Windows Server 2008 Network Connections, create a bridge between the Wireless Network Connection and the Virtual External Wireless Network you created in step 2 above. The “internal only” virtual network is named as “External”because it is bridged to a physical wireless network adapter, which provides "external" access to the virtual machines.
  3. Link the virtual machine’s virtual network adapter to the Virtual External Wireless Network.

Other Issues

Certificates and VMs starting errors: http://blogs.msdn.com/virtual_pc_guy/archive/2010/03/17/fixing-hyper-v-virtual-machines-sticking-at-6-starting.aspx

How to Run Hyper-V on HP EliteBook 8450w


Hyper-V on the TechNet Library http://technet.microsoft.com/en-us/library/cc753637%28WS.10%29.aspx

TechNet Forum: laptop models that work with hyper-v

Infoworld Blog: laptops that run Hyper-V (see comments)

MSDN Blog: Using Windows Server 2008 as a SUPER workstation OS

Using Wireless with Hyper-V


See Also

Community Resources

Other Languages

This article is available in other languages, including Italian.

 Here's how I did to run Hyper-V on an Lenovo ThinkPad T61 (Brazilian Portuguese)
(Aqui descrevo como instalei o Hyper-V em um Lenovo ThinkPad T61)

Leave a Comment
  • Please add 4 and 1 and type the answer here:
  • Post
Wiki - Revision Comment List(Revision Comment)
Sort by: Published Date | Most Recent | Most Useful
  • Carsten Siemens edited Revision 52. Comment: Fixed misspelling

  • Horizon_Net edited Revision 43. Comment: added language tags

  • Jewel Lambert edited Revision 40. Comment: corrected spelling typos

  • tonysoper_MSFT edited Revision 39. Comment: +chvsg

  • TejasJ edited Revision 38. Comment: tags edit.

  • Jeff Centimano_MSFT edited Revision 25. Comment: Clarified point about how Hyper-V is required to run 64-bit virtual machines

  • Tony Soper_MSFT edited Revision 23. Comment: VGA driver issue added

  • tonyr edited Revision 20. Comment: another correction that has NOT been made

  • Tony Soper_MSFT edited Revision 18. Comment: removed enable PS settings info because results aretoo unpredictable per JH

  • Francisco edited Revision 16. Comment: minor spelling correction (becuase-->because)

Page 1 of 2 (17 items) 12
Wikis - Comment List
Sort by: Published Date | Most Recent | Most Useful
Posting comments is temporarily disabled until 10:00am PST on Saturday, December 14th. Thank you for your patience.
  • tonyr edited Revision 3. Comment: spelling correction and no I'm not a spelling nut.

  • nirmalmadhawa edited Revision 4. Comment: Windows Server 2009 needs to be changed to Windows Server 2008

  • "There's no solution for 64-bit vitual machines on your laptop as of this writing."  what exactly does this mean? I can have a 64bit laptop running w2k8r2 running 64bit vhd's right?

  • Also note 3D graphics acceleration/smooth Aero interface/DirectX can be semi crippled depending on the graphics card as enabling the hypervisor removes the systems write combining ability (write combining doesnt conform to the memory architecture of Hyper-V).  see blogs.msdn.com/.../understanding-high-end-video-performance-issues-with-hyper-v.aspx

  • Ed Price MSFT edited Revision 10. Comment: Added a "See Also" link. Cleaned up some formatting.

  • Ed Price MSFT edited Revision 11. Comment: Cleaned up more formatting.

  • Ed Price MSFT edited Revision 12. Comment: Minor title edit. More format cleaning.

  • Tony Soper_MSFT edited Revision 13. Comment: MMS Test

  • Tony Soper_MSFT edited Revision 14. Comment: MMS demo

  • Tony: Yes, Hyper-V can run 64bit VMs

  • Francisco edited Revision 16. Comment: minor spelling correction (becuase-->because)

  • Tony Soper_MSFT edited Revision 18. Comment: removed enable PS settings info because results aretoo unpredictable per JH

  • tonyr edited Revision 20. Comment: another correction that has NOT been made

  • Tony Soper_MSFT edited Revision 23. Comment: VGA driver issue added

  • I have a dumb question.  Can I do this from trial versions of server 2008?

Page 1 of 3 (42 items) 123