Revision #2

You are currently reviewing an older revision of this page.
Go to current version

Use Ctrl-F to find a specific code.

Some codes have a recommended action using PowerShell as well as the general action.

Links to other error code pages can be found at Virtual Machine Manager (VMM) for System Center 2012 Error Codes.

 

If you have additional information about an error, please add it to the "Additional Troubleshooting Information" column.

 

Code Message Recommended Action (in product) Additional Troubleshooting Information
3500 Virtual Server host is unavailable. BLANK
3501 There is not enough disk space on the available volumes.\nMaximum disk space on t he most appropriate volume, accounting for the host resource utilization (in megabytes): %BinaryDiskSpaceAvailable; \n The virtual machine requirement (in megabytes): %PlacementRequestValue; \nThe maximum available space at the time of ev aluation, after considering the virtual machine requirements (in megabytes): %PlacementCapacityValue; BLANK
3502 There is not enough disk space on the available volumes due to disk reserves.\nMa ximum disk space on the most appropriate volume, accounting for the host resource utilization and reserves (in megabyte s): %BinaryDiskSpaceAvailable;\nThe virtual machine requires (in megabytes): %PlacementRequestValue;\nThe maximum space at the time of evaluation, after considering the virtual machine requirements (in megabytes): %PlacementCapacityValue; BLANK
3503 Not enough memory available. Total memory on the host is %MemorySize; MB. Account ing for reserves, remaining memory for use by existing and new virtual machines is %MemorySizeAfterReserves; MB. At the time of evaluation, the remaining memory was %PlacementCapacityValue; MB and the amount requested by this virtual mach ine was %PlacementRequestValue; MB. BLANK
3504 Not enough memory available due to the host reserve at level: %ReserveLevel;. Tot al memory at this reserve level for use by existing and new virtual machines is %MemorySize; MB. At the time of evaluat ion, the remaining memory was %PlacementCapacityValue; MB and the amount requested by this virtual machine was %Placeme ntRequestValue; MB. BLANK
3505 The projected CPU utilization exceeds the CPU utilization of %PercentageReserve;% % specified at host reserve level: %ReserveLevel;. BLANK
3506 The projected network utilization percentage (%Percentage;%% of %LinkSpeed; Mbps) exceeds the reserved network capacity percentage (%PercentageReserve;%%). BLANK
3507 Not enough performance data. BLANK
3508 Duplicate virtual machine name %VirtualMachineName; was discovered. BLANK
3509 ID %ProcessorTypeGuid; is not found in the list of supported processors. Ensure that the processor ID is valid and then try the operation aga in.
3510 There is insufficient disk space on the volume %VolumeDriveLetter; to complete pl acement of the virtual machine. Free %BinaryDiskSpaceRequired; of disk space on the volume %VolumeDr iveLetter;, or choose a different volume to continue with the placement.
3511 The path %PathName; exceeds the maximum allowed length by %DiffFromMaxLimit; char acters. The maximum length allowed in a path is %MaxLimit; characters. Enter a shorter path, and then try the operation again.
3512 The projected disk I/O utilization (IOPS) %ProjectedIOPS; exceeds the maximum dis k I/O utilization (IOPS) of %MaximumIOPS;. BLANK
3513 Unable to set the value for %Parameter;. The sum of all elements exceeds the maxi mum length of %MaxLength;. Choose a different value below the maximum length, and then try the operation again.
3514 Unable to connect to the Virtual Server service on the library server %ServerName ;. Ensure that the Virtual Server service is installed and running on t he library server.
3515 Issues were identified while evaluating virtual machine placement.
3516 The specified virtual network adapter configuration is not supported by the host virtualization software. Update the virtual network adapter configuration and then try the op eration again.
3517 Unable to save the virtual machine configuration files because volume %VolumeDriv eLetter; is marked as unavailable for placement. Select a different save path for this virtual machine and then try t he operation again.
3518 The VLAN setting for one or more network adapters on the virtual machine (%VMName ;) is not compatible with the virtualization software on the virtualization host (%VMHostName;). Ensure that virtual LAN identification is disabled for all network a dapters listed in the hardware configuration of the virtual machine (%VMName;) or specify a different host, and then tr y the operation again.
3519 Issues were identified while evaluating physical system placement.
3520 The virtual machine (%VMName;) violates the maximum memory limit for the virtuali zation host (%VMHostName;).\nMaximum memory: %ParameterValue;
3521 No network interface card could be identified that meets all requirements.
3522 Network bandwidth on the virtualization host (%VMHostName;) is not sufficient for all network workloads.
3523 Network bandwidth on the virtualization host (%VMHostName;) is not sufficient to satisfy the reserve level for all network workloads.
3525 No connected IP address pool with remaining IPv4 addresses could be identified to supply an address for the network adapter.\nNetwork adapter ID: %ParameterName;
3526 No connected MAC address pool with remaining addresses could be identified to sup ply an address for the network adapter.\nNetwork adapter ID: %ParameterName;
3527 No connected virtual IP (VIP) address pool with sufficient remaining addresses co uld be identified for the virtual machines in this tier.
3528 There are no enough network interface cards to satisfy the number required by the physical system.
3529 No connected storage device could be identified that satisfies all requirements.
Revert to this revision