Browse by Tags

Tagged Content List
  • Wiki Page: How to Migrate from Hyper-V 2008 to Hyper-V 2008 R2

    You can have a look to KB957256 that describe how to upgrade computers running Windows Server 2008 with the Hyper-V role installed to Windows Server 2008 R2, in a standalone, or in a cluster environment. Here are the 3 methods you can use: Perform an upgrade of the parent partition from...
  • Wiki Page: Hyper-V: Architecture

    See also: Understanding and comparing the hyper-v architecture at TechNet Wiki. Table of Contents Resources See Also Windows Server 2008 R2 Hyper-V Component Architecture Poster Online Seadragon (deepzoom) viewer for the Windows Server 2008 R2 Hyper-V Component Architecture Poster...
  • Wiki Page: Hyper-v Share folders between Host and Guest Operating System

    Unlike VMware WorkStation or Virtual PC(Shared folders) ,Hyper-v do not have Easy way to share Host Machine Shared Folders unless you do some Configuration . In this post,will go through how to Access Your Host shared folders(Physical Machine) from your Guest OS (Hyper-v) Machines and Vice Versa...
  • Wiki Page: System Center 2012 SP1 – Virtual Machine Manager – The Review

    System Center 2012 SP1 – Virtual Machine Manager – The Review I have been using Virtual Machine Manager since the 2008 version and watched the development with big enthusiasm. The launch of System Center 2012 was beyond impressive, and Service Pack 1 – that will support Windows Server 2012 (Hyper...
  • Wiki Page: Cấu hình NIC Teaming trên Windows Server 2012 (vi-VN)

    PHẦN 1:CẤU HÌNH I- GIỚI THIỆU: NIC teaming là chức năng cho phép nhiều card mạng trên một server vật lý được gộp chung với nhau thành một "team" nhằm gộp băng thông của các Card mạng và tăng cường khả năng chịu lỗi (fault tolerance) cho kết nối mạng trên Server. Khi một trong các...
  • Wiki Page: TỔNG QUAN HYPER-V TRÊN WINDOWS SERVER 2012 (vi-VN)

    I- GIỚI THIỆU: Khi triển khai môi trường hệ thống mạng cho doanh nghiệp, doanh nghiệp cần sử dụng bao nhiêu dịch vụ thì bạn phải cài bấy nhiêu Server vật lý tương ứng. Tại sao không cài chung tất cả các dịch vụ vào cùng Server? a. Khi cài các dịch vụ vào cùng Server thì bạn phải mở các port...
  • Wiki Page: Using Services Templates in System Center Virtual Machine Manager 2012

    Introduction The problem: Before we begin, to help understanding the article, consider the following questions: • How long do you take to install a server and leave it ready to be used in production environment? • How long do you take to configure a server that will be used as a database...
  • Wiki Page: VMM 2008 R2: So Now You're the Virtualization Manager

    Note: This article is based on VMM 2008 and might not apply to VMM 2012 (R2) Now that your organization has begun to embrace this virtualization trend that’s spreading across the IT industry it has become apparent that it is hard to know what you have when working with virtual machines. With physical...
  • Wiki Page: What VMM 2008 R2 Does with AZMan Role Definitions from Hyper-V

    This topic is a work in progress This is community content being developed for the TechNet Wiki. Feel free to contribute. Note: This article is based on VMM 2008 and might not apply to VMM 2012 (R2) Table of Contents Overview Authorization for Hyper-V Virtual Machines in...
  • Wiki Page: Hosting Test Lab Guide Environments in Windows Server 2012 Hyper-V

    The following topics describe how to configure test lab environments in Windows Server 2012 Hyper-V as described in Test Lab Guides from Microsoft: Hosting the Windows Server 2012 Base Configuration test lab Hosting the SharePoint Server 2013 three-tier farm test lab Hosting the Corpnet subnet...
  • Wiki Page: VMM 2008 R2 Service Account Requirements

    Note: This article is based on VMM 2008 and might not apply to VMM 2012 (R2) For the service account in System Center Virtual Machine Manager (VMM), you can use either Local System (the default) or an Active Directory domain account. When to Use a Domain Account for the VMM Service In the...
  • Wiki Page: VMM 2008 R2: How VMM Connects to Virtual Machines

    Note: This article is based on VMM 2008 and might not apply to VMM 2012 (R2) Table of Contents Connections to Hyper-V Virtual Machines from VMM Connections to Virtual Server Virtual Machines from VMM Connections to VMware Virtual Machines from VMM The technology that System Center Virtual Machine...
  • Wiki Page: How to Install and Manage Hyper-V Server 2008 R2 SP1

    Note: This article is based on Hyper-V 2.0, and might not apply to Hyper-V 3.0 (Server 2012) Table of Contents Overview Prerequisites for Installation Installation To manage from Windows 7 Resources 1- Installing Hyper-V Server 2008 R2 SP1 Overview Microsoft® Hyper-V™ Server 2008 R2...
  • Wiki Page: Hyper-V 2008 R2 SP1: Dynamic Memory Settings

    Note: This article is based on Hyper-V 2.0, and might not apply to Hyper-V 3.0 (Server 2012) Table of Contents Startup RAM Maximum RAM Memory buffer Memory weight Startup RAM Default: 512 MB Minimum: 8 MB Step: 2 MB Figure 1. Hyper-V Manager: Startup RAM Figure 2. SCVMM...
  • Wiki Page: Hyper-V 2008: Troubleshooting Event ID 3112 "The virtual machine could not be started because the hypervisor is not running."

    Note: This article is based on Hyper-V 2.0, and might not apply to Hyper-V 3.0 (Server 2012) This article builds upon the topic in the TechNet Library at: http://technet.microsoft.com/en-us/library/dd581879(WS.10).aspx Applies To: Windows Server 2008 Table of Contents How to Resolve...
  • Wiki Page: How to Install Forefront Security for Exchange Server in a Hyper-V 2008 R2 Virtual Environment

    Note: This article is based on Hyper-V 2.0, and might not apply to Hyper-V 3.0 (Server 2012) Forefront Security for Exchange Server (FSE) supports the Hyper-V platform. FSE is approved for any hypervisor-based virtualization technology certified under the Microsoft Server Virtualization program...
  • Wiki Page: Hyper-V 2008 R2: Protection with DPM 2010: How to Automatically Protect New Virtual Machines

    Note: This article is based on Hyper-V 2.0, and might not apply to Hyper-V 3.0 (Server 2012) Applies to: DPM 2010 (Beta) This information was originally provided by Angad Pal Singh on the Data Protection Manager blog : In any virtualized environment, adding new VMs is a frequent operation...
  • Wiki Page: Hyper-V 2008 R2: VM State to Memory Dump Converter

    Note: This article is based on Hyper-V 2.0, and might not apply to Hyper-V 3.0 (Server 2012) The Hyper-V(tm) VM State to Memory Dump Converter ( vm2dmp ) is a command-line tool that converts the saved state of a Hyper-V virtual machine to a full memory dump file compatible with Debugging Tools for...
  • Wiki Page: Hyper-V: How to Find Virtualization Hosts (Servers with Hyper-V Enabled)

    Note: This article is based on Hyper-V 2.0 and might not apply to Hyper-V 3.0 (Server 2012) John Howard , Senior Program Manager in the Hyper-V team at Microsoft, shared a sample VBScript you can use how to determine which domain-joined servers are running Hyper-V by using the SCP or "Service...
  • Wiki Page: How to Manage Hyper-V 2008 R2 Virtual Machines in VMM 2008

    This topic is a work in progress. This topic is posted on the TechNet wiki to enable the Hyper-V and VMM communities to develop content based on their own experiences. Please share your knowledge by updating the topic. It's the wiki way! Note: This article is based on Hyper-V 2.0 and VMM 2008...
  • Wiki Page: Hyper-V 2008 R2: Virtual Networking Survival Guide

    This article is a work in progress based on adam's blog post at: http://blogs.msdn.com/adamfazio/archive/2008/11/14/understanding-hyper-v-vlans.aspx and the whitepaper " Understanding Networking with Hyper-V ." Please add your best practice advice . Note: This article is based...
  • Wiki Page: Hyper-V 2008/2008 R2: Gotchas

    Note: This article is based on Hyper-V 2.0 and might not apply to Hyper-V 3.0 (Server 2012) TechEd Demo Edit These are the top "gotchas" or "known issues" that folks seem to have trouble with in Hyper-V. "Gotchas" are sometimes also called "lessons learned"...
  • Wiki Page: Hyper-V 2008 R2 Virtual Machine Snapshots: FAQ

    Table of Contents What are virtual machine snapshots? What are snapshots used for? How are snapshots stored? Can I delete these pesky .avhd files? What other important considerations I should be aware of when using snapshots? I’ve taken multiple snapshots and now my virtual machine pauses automatically...
  • Wiki Page: Hyper-V 2008 R2: Management Best Practices

    Table of Contents Best Practice Community Resources See Also References Note: This article is based on Hyper-V 2.0, and might not apply to Hyper-V 3.0 (Server 2012) This is a work-in-progress to collect your best practices for Hyper-V and VM Management. Best Practice When...
  • Wiki Page: Hyper-V 2008 R2: Delegate Access Control and Management

    Table of Contents Note: This article is based on Hyper-V 2.0, this might not apply to Hyper-V 3.0 (Server 2012) Overview Concept Authorization Manager (azman) Note: This article is based on Hyper-V 2.0, this might not apply to Hyper-V 3.0 (Server 2012) Overview Delegating access control...
Page 2 of 18 (432 items) 12345»
Can't find it? Write it!