Browse by Tags

Tagged Content List
  • Wiki Page: Understanding Network Location and Tags in SCVMM

    Network Location : This represents the logical network identity for an individual physical network adapter. The Network Location Awareness (NLA) service provider on the Windows-based virtual machine host is used to return this information for every active network connection. NLA will first identify...
  • Wiki Page: SCVMM V2V Failed with Error - Protocol Error with Too Many Authentication Failures for Root

    When you perform a V2V using SCVMM from a VMware ESX 3.5 host and we may get the following error: Error (12709) The operation on did not complete successfully because of the error: Server sent disconnect message: type 2 (protocol error : too many authentication failures for root) Firs, confirm...
  • Wiki Page: Hyper-V: Tools

    This is a list of tools, resources, and external links to download and learn about those tools. Table of Contents Supported Microsoft Tools (Solution Accelerators, Product Downloads, etc.) Microsoft Products and Solutions that are Built upon Hyper-V Technology Remote Management from Client Versions...
  • Wiki Page: VMM 2012 change BITS port used for template provisioning (BITS over HTTPS)

    For provisioning a template from the Library VMM uses BITS (Background Intelligent Transfer Service). BITS was designed to transfer large amounts of data without consuming a lot of network bandwidth by sending the data in small parts. In many cases you might receive an error in the VMM log when...
  • Wiki Page: System Center 2012 – Virtual Machine Manager (VMM) Error Codes [25000-25999]

    Use Ctrl-F to find a specific code. Some codes have a recommended action using PowerShell as well as the general action. Links to other error code pages can be found at System Center 2012 – Virtual Machine Manager (VMM) Error Codes . If you have additional information about an error, please...
  • Wiki Page: Using the Virtual Machine Recovery Tool for System Center 2012 – Virtual Machine Manager (VMM)

    The stand-alone Virtual Machine Recovery Tool works with System Center 2012 – Virtual Machine Manager (VMM) to temporarily remove a host, cluster, virtual machine, or service from VMM when that object is in a failed or persistent warning state due to environmental conditions, third-party applications...
  • Wiki Page: System Center 2012 – Virtual Machine Manager (VMM) Error Codes [0-499]

    Use Ctrl-F to find a specific code. Some codes have a recommended action using PowerShell as well as the general action. Links to other error code pages can be found at System Center 2012 – Virtual Machine Manager (VMM) Error Codes . If you have additional information about an error, please...
  • Wiki Page: Wiki: Portal de Virtualização (pt-BR)

    A plataforma de virtualização Microsoft é reconhecida como uma solução completa que atinge desde desktops até servidores. O portal de virtualização tem como objetivo consolidar os artigos do TechNet Wiki. A inclusão será realizada quando mais links estiverem disponíveis. NOTA IMPORTANTE: Não...
  • Wiki Page: Deploying Microsoft VDI in Windows Server 2012 R2

    This is a work in progress, so please feel free to edit this page and add new items or sections as appropriate. Table of Contents Introduction Optional components: Overview of the Microsoft VDI environment Planning consderations Deploying the RDS roles Deploy Integration Tuning and Optimization...
  • Wiki Page: SCVMM 2008 R2 Host Ekleme (tr-TR)

    Merhaba yine bir SCVMM makalesi ile beraberiz. Bundan önce ki makalemiz olan SCVMM 2008 R2 Local Agent Kurulumu ve Host Ekleme konu başlıklı makaleyi işlemiştik. Hatırlayacak olursan domain ortamında olmayan yani workgroup bir ortamda ki hostu VMM Administrator Console nasıl ekleyebileceğimizi görmüştük...
  • Wiki Page: SCVMM 2008 R2 Üzerinde Hardware ve Guest Os VMs Bağlanması (tr-TR)

    Merhaba değerli arkadaşlar SCVMM 2008 R2 seri olarak yazmış olduğumuz makalelere yine devamı olarak SCVMM 2008 R2 Üzerinde Oluşturulan Hardware ve Guest Os Profillerin VMs Bağlanmasını birlikte inceleyeceğiz. Ama bundan önce sizlere bu konu ile ilgili olarak 3 başlık halinde yazmış olduğum makalelerin...
  • Wiki Page: SCVMM 2008 R2 Host Ekleme Seçenekleri (tr-TR)

    Merhaba arkadaşlar bu makalemde sizlere SCVMM 2008 R2 üzerinde host ekleme seçeneklerinden bahsetmek istiyorum. SCVMM üzerine 3 şekilde host ekleyebiliriz. Bunlar 3 başlık olarak aşağıda belirtilmiştir. - Windows Server-based host on an Active Directory domain - Windows Server-based host...
  • Wiki Page: Como alterar no Hyper-V uma legacy NIC para uma synthetic NIC (pt-BR)

    Table of Contents Introdução Aplica-se a: Passo-a-Passo: Conclusão Introdução Quando você possui uma infraestrutura de WDS, você pode instalar sistemas operacionais ou fazer deploy de imagens personalizadas utilizando a instalação por PXE. Para poder fazer isso em um ambiente virtual...
  • Wiki Page: System Center 2012 SP1 – Virtual Machine Manager – The Review

    System Center 2012 SP1 – Virtual Machine Manager – The Review I have been using Virtual Machine Manager since the 2008 version and watched the development with big enthusiasm. The launch of System Center 2012 was beyond impressive, and Service Pack 1 – that will support Windows Server 2012 (Hyper...
  • Wiki Page: System Center Virtual Machine Manager (SCVMM) 2012 - PHẦN 2: Tạo máy ảo (vi-VN)

    I- GIỚI THIỆU: Trong phần 1 của loạt bài về SCVMM 2012 này, chúng tôi đã trình bày các thao tác cần thiết để cài đặt System Center Virtual Machine Maneger (SCVMM) 2012 SP1 . Trong phần 2 này tôi sẽ trình bày các thao tác cơ bản để có thể quản lý Hyper-V và tạo các máy ảo trên host Hyper-V ...
  • Wiki Page: System Center Virtual Machine Manager (SCVMM) 2012- Phần 4 - Networking (vi-VN)

    I- GIỚI THIỆU: Windows Server 2012 và SC VMM 2012 SP1 cho phép cấu hình mạng ảo dựa trên chức năng "Network Virtualization" cho phép xây dựng nhiều cơ sở hạ tầng mạng ảo dựa trên cùng một mạng vật lý cho từng khách hàng mà không lo ngại về khả năng trùng lặp IP giữa các khách hàng sử...
  • Wiki Page: List of Virtual Machine Manager (VMM) 2008 (R2) Updates

    Note: This article is based on VMM 2008 and the updates listed do not apply to VMM 2012 (R2) This article includes a list of System Center Virtual Machine Manager (VMM) updates that the VMM 2008 and 2008 R2 Configuration Analyzer (VMMCA) checks for, and a list of recent VMM-related updates...
  • Wiki Page: Virtual Machine Manager (VMM) 2008 R2 Error Codes

    Note: This article is based on VMM 2008 and might not apply to VMM 2012 (R2) System Center Virtual Machine Manager (VMM) 2008 R2 error codes are generated by a state or action, and they display a message that provides information or notifies you of a problem. When appropriate, the error message...
  • Wiki Page: How to Troubleshoot Host Connectivity Issues in SCVMM 2008 R2

    Note: This article is based on VMM 2008 and might not apply to VMM 2012 (R2) If you're an administrator for System Center Virtual Machine Manager, at times you may come across cases where a host shows as "Needs Attention" or "Not Responding" or even as "Intermittent...
  • Wiki Page: How to Clone Virtual Machines in System Center Virtual Machine Manager 2008

    Note: This article is based on VMM 2008 and might not apply to VMM 2012 (R2) SCVMM can use an existing virtual machine as a source for future virtual machines. The source in this case can reside on a virtual machine host or on the library server. Creating a virtual machine from a virtual machine...
  • Wiki Page: How SCVMM 2008 R2 Determines CPU Average Displayed in the Admin Console

    Note: This article is based on VMM 2008 and might not apply to VMM 2012 (R2) This article describes the performance metrics details that System Center Virtual Machine Manager (SCVMM) collects and how to make sense of performance information that is displayed in SCVMM. SCVMM uses a periodically...
  • Wiki Page: VMM 2008 R2: So Now You're the Virtualization Manager

    Note: This article is based on VMM 2008 and might not apply to VMM 2012 (R2) Now that your organization has begun to embrace this virtualization trend that’s spreading across the IT industry it has become apparent that it is hard to know what you have when working with virtual machines. With physical...
  • Wiki Page: How to Change the Owner Value for All VMs in SCVMM 2008

    Note: This article is based on VMM 2008 and might not apply to VMM 2012 (R2) Have you ever found yourself in a situation where you have a bunch of virtual machines (VMs) where the OWNER value is set to UNKNOWN and you wanted to set a value owner without having to modify them one VM at a time? If...
  • Wiki Page: How to Add NIC Drivers for Offline P2V in SCVMM 2008

    Note: This article is based on VMM 2008 and might not apply to VMM 2012 (R2) When performing a physical-to-virtual (P2V) conversion of either a Windows 2000 SP4 server or any Windows based domain controller, the only supported method to do this is via an offline conversion. With offline P2V, the...
  • Wiki Page: Using a Read Only Domain Controller as a Host in SCVMM 2008 and R2

    Note: This article is based on VMM 2008 and might not apply to VMM 2012 (R2) While using a Read Only Domain Controller as a Host is possible, it is not a best practice. Nonetheless, a few customers are running into issues when attempted. One of our SCVMM engineers researched the issue and has developed...
Page 1 of 5 (104 items) 12345
Can't find it? Write it!